Note: If you can provide the following data in the mail, you will be provided with a quick quote and detailed specifications soon:
1) What type of product is needed? (such as floors, wall panels, fences, etc.)
2) What is the maximum demand in meters or square meters? For example, 100m? 200 square meters?
3) What is the product model you need? (Individual products have no product model)
4) In which areas do you need to use the product? Family use or agency sales?
Thank you for your interest in Seven Trust's wood-based products. Please feel free to submit your enquiry to us. Our sales manager will contact you as soon as possible.
Place the gate against the brick wall in the closed position. Have a friend or family member help you hold the gate while you place a bubble level on the front of it. Position the gate so it stands plumb, then swing the gate to the open position. Mark the mounting holes on the hinges onto the wall, using a felt-tip marker. Set the gate aside.
Concrete and concrete block. How to Use: Drill right through the wood and into the concrete with a masonry bit and hammer drill. Use a depth stop to get the correct depth and then blow the dust out of the hole with a turkey baster (don’t use your breath, because the dust will blow back in your face).
Cinder block isn't dense enough to prevent the inevitable pull out forces the gate will create on the tapcons. For cinder block usage, tapcons work a lot better in shear than in pull-out. I would use the hilti toggle bolt if it will be in an open web, a lead shield if it is in a web and an expanding anchor if it is in a solid, poured cell.
Attach two hinges to the gate, evenly spacing them from top to bottom. Use either the screws that come with the hinges or 1-inch exterior wood screws. Hold the gate against the post, line up the hinges with the post and drive similar screws to hold the gate.
Attaching a wooden gate to a cinder block pillar rendered in ledge stone. up vote 0 two new pillars at the entrance made of cinder block rendered in ledge stone. Look great! Next step - we want to attach a gate between the two pillars - safety for kids and dog. Should you solid fill a low cinder block wall? 2. Pros and cons of painting
Whether attaching a gate post to a block wall or adding a wood component to another block structure, joining How to Attach a Fence to a Stucco Wall eHow A fence can provide privacy for your family and may be attached to a stucco house If your home has stucco walls with a masonry base, use masonry anchors.
Attaching a gate to a block wall means that you will have a live load on the wall. In my experience, most mechanical anchors will eventually work loose from the gate action regardless of the use of a 4 X 4 post or hanging the gate directly to the wall.
Making a cut in a concrete block wall to install a gate is physically difficult and requires significant strength to perform safely. A concrete saw is heavy and the reach required to cut through a wall requires you to operate at an awkward angle.
Fixing the gate posts to a wall 1 Don’t forget to get a coating of paint or stain onto all sides of the gate post, don’t forget to also coat the top and underneath of the post. (In the video I’ve used a post without any coatings, this was just for the benefit of the video as it made everything show up a bit better!).
Shanghai Seven Trust Industry Co., Ltd, founded in the year 2008, is a hi-tech enterprise which specializes in the R&D, sales, and service of WPC materials, Provide excellent products, professional technology and sincere service.